JADUS

Are you interested in owning and operating Jadus Motorcycle Parts? If you’re reading this, you’re probably already a Yamaha SR250 owner...

Many engine components are a mystery until you experience problems with them, need to research them and then get your hands on them. ...

As mentioned on our webshop page, we are moving into a new chapter - one where we will try to optimise what we are best at… parts...

Wheels on a motorcycle are much more important for the overall look than one first imagines. Many hobby custom builders overlook this...

We developed the Jadus SR250 Euclid seat to make it easier for garage builders to get a cool looking bike without needing to chop the...

We thought it was fair to dedicate a blog post to our awesome universal motorcycle mudguards/fenders. Why? To illustrate the diverse...

Production batch of Jadus SR250 Exhaust Headers - with incorrect surface finish (yes, sent back, a further 3 week wait to re-do them :( ...

This post is meant to complement a video we clipped together explaining the operation, details, pros and cons, service, maintenance and...

The left fork on our SR250 Classic test mule had been leaking since we purchased it and it was just getting worse and worse. It started...

The development of the special side covers on the Jadus promotional bike was an awesome project within the build project itself, and it...

I went to a motorcycle show on the weekend and was disappointed. Not because of the lack of cool stuff on display, but because there was...

I have been pondering this post for a while now, almost the whole winter in fact. That is one thing winter in Sweden is good for....

For the past few weeks I have been battling with the carbs on the XS750 that was built last year. They just haven't been running right...

Pretty stoked to see how well received this first bike was by the custom motorcycle community. This rad front 3/4 shot of the bike was...

Its been a while since I posted anything on here but things are moving forward - mostly with the SR250 project bike, but with other parts...

One of the forks had an oil leak indicating that the seal was gone. This and the fact that David wanted the forks legs to be powder...

The header also came up pretty good after blasting. I then painted it with high temp (690C) black spray paint. I laid on 3 coats and...

After doing a full ‘dry fit’ of all the parts, they were then removed and blasted with glass beads. The parts came up pretty good, some...

The part I have been dreading all along… The wiring. Not because I don’t enjoy it, I do. Its like a puzzle to figure out and it is...

To attach the new small indicators, a set of brackets needed to be made. At the front, there is a spare threaded M5 hole on the side of...